Commit 32cd0138 authored by natalie's avatar natalie 💜
Browse files

commit STL files for baseplate

parent 4f9393e5
......@@ -9,6 +9,8 @@ The portable and desktop MegaGRRL versions share a single codebase, contained in
A simplified flashing guide is available for Windows users [here](https://git.agiri.ninja/snippets/3).
## PCB manufacturing considerations
The board doesn't really have anything too weird on it, but do watch out that your PCB house does the plated slots for the headphone jack correctly. The DRC rules are set for tented vias - these are preferable for aesthetics, but are otherwise not required.
## 3D Printing
`mgd_base.stl` is an STL file for a 3D-printable baseplate for the MegaGRRL Desktop board. This provides a nice flat bottom surface and also supports the PCB underneath areas that undergo flexing (buttons, IC sockets). Please note that this was designed in mil, so in most slicers you will need to resize this to 2.54% to get it in millimeters. The original OpenSCAD source file is also available. 100% infill is recommended, and printing with a brim may help bed adhesion. Supports are needed due to the recessed screw holes.
## License
The schematic, PCB, and baseplate are licensed under CC BY-NC-SA 4.0. You are free to build this project for yourself or friends, but please do not sell it or misrepresent its origin. If you are interested in selling assembled players, please contact hello@kunoichilabs.dev
## Beware Fake Chips!
......
This diff is collapsed.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment